Specifications
| Type: | Separating toilet with composting function and electronically controlled ventilation system | |
| Material: | Housing: stainless steel, polished and riveted Toilet bowl/lid: polypropylene (PP)electronically controlled ventilation system |
Stainless steel is durably hygienic and is not vulnerable to ageing. PP is resistant to chemical influences. |
| Width: | 322 mm at the stainless steel housing, 332 mm at the outer rim of the toilet bowl | The widest point is at the transition from the toilet bowl to the stainless steel housing |
| Height: | 388 mm | |
| Depth: | 390 mm | |
| Weight: | 6.5 kg | The most lightweight composting toilet with agitator in the solids container |
| Capacity: | Urine tank 10 litres Solids container 15 litres |
Indicative values for use by 2 persons: The urine tank must be emptied after approx. 3 days. The solids tank reaches its capacity after approx. 21 days. |
| Load capacity: | up to 200 kg | |
| Composting function: | Agitator in the solids container. The removable handle can be easily attached (without tools) either to the right or left of the housing. | |
| Ventilation system: | 12 V fan with electronic control and protection. - incl. low-voltage protection - incl. interval ventilation - power consumption 1 W - unit has its own fuse - incl. control panel (toggle switch) |
The ventilation system helps to remove moisture out of the housing. This is necessary for drying the faeces and reliably prevents odours and condensation inside the housing. The urine tank has its own odour trap. |
| Installation options: |
- Movable in the camper's toilet compartment - Attached to the rear wall of the enclosure - Attached to the bottom of the enclosure |
When storing in a toilet compartment of the camper, either the storage compartment or the toilet itself can be ventilated (the fan unit is not mounted on the housing but on the vehicle) For a fixed installation, the mounting holes are already pre-cut. The openings only need to be broken out with a screwdriver. A connection option to an underfloor tank to collect the urine is also available. |
Dimensional Drawings
Installation dimensions from the side, the front (without the operating area of the removable handle) and the dimensions of the bowl and the seat.
There are already six holes for mounting prepared in the base plate. In addition, an opening is prepared in all housings to lead a 3/4" drain hose to the outside. This allows the urine to be drained into an underfloor tank (UTA models). The maximum total height with the lid open (lid vertical) is 730 mm.
 |
 |
 |
 |